Halloween Forum banner
Cancel

Add bookmark
Rear shot of the Troll. I put fur down his back to cover the access panel that allows me to check on the mechanics inside.

Rear shot of the Troll. I put fur down his back to cover the access panel that allows me to check on the mechanics inside.

  • 0
  • 5
The Troll is finally finished! :) He will peer around a tombstone, back and forth looking at all the ToTs!

The Troll is finally finished! :) He will peer around a tombstone, back and forth looking at all the ToTs!

  • 0
  • 3
The troll has hair! :)

The troll has hair! :)

  • 0
  • 0
Adding the faux fur to the mask.

Adding the faux fur to the mask.

  • 0
  • 0
Another shot of the paint.

Another shot of the paint.

  • 0
  • 0
Mixed several colors of paint to get this troll brown color! :)

Mixed several colors of paint to get this troll brown color! :)

  • 0
  • 1
Warts were made and added with the use of some great stuff.

Warts were made and added with the use of some great stuff.

  • 0
  • 0
The Troll gets a little monster mud!

The Troll gets a little monster mud!

  • 0
  • 0
Now to decide if I want to apply Monster Mudd or some kind of latex, or just a costume... Hummmm....

Now to decide if I want to apply Monster Mudd or some kind of latex, or just a costume... Hummmm....

  • 0
  • 0
Troll is nearing completion....

Troll is nearing completion....

  • 0
  • 0
Here is another shot of the head turn mechanism. Basically, a wiper motor with a custom PVC slide guide that allows it to fit inside the tight space

Here is another shot of the head turn mechanism. Basically, a wiper motor with a custom PVC slide guide that allows it to fit inside the tight space

  • 0
  • 0
I added a tail because all trolls I know have tails! :)

I added a tail because all trolls I know have tails! :)

  • 0
  • 2
The troll gets a new body.

The troll gets a new body.

  • 0
  • 0
I had to redesign the head turn mechanism to fit in a much tighter space, so I made a sweet little slide out of the PVC arm using a screw and washer a

I had to redesign the head turn mechanism to fit in a much tighter space, so I made a sweet little slide out of the PVC arm using a screw and washer a

  • 0
  • 0
All trolls must have feet!

All trolls must have feet!

  • 0
  • 0
I wasn't pleased with the design of the tombstone troll, so I decided to give him an overhaul! This is the new base. You can see that he now has leg

I wasn't pleased with the design of the tombstone troll, so I decided to give him an overhaul! This is the new base. You can see that he now has leg

  • 0
  • 0
A face only a mother could love... yeah right!

A face only a mother could love... yeah right!

  • 0
  • 0
Tombstone Troll Head.

Tombstone Troll Head.

  • 0
  • 0
Everything is screwed down from underneath the baseboard.

Everything is screwed down from underneath the baseboard.

  • 0
  • 0
This shot shows the frame for the chicken wire body.

This shot shows the frame for the chicken wire body.

  • 0
  • 2
Finishing up the chicken wire frame. I wanted the troll to have a hunch-back, so I raised up the rear to compensate.

Finishing up the chicken wire frame. I wanted the troll to have a hunch-back, so I raised up the rear to compensate.

  • 0
  • 2
Wrapped the prop with chicken wire to give the troll a body. I will cover it later with fabrics, etc.

Wrapped the prop with chicken wire to give the troll a body. I will cover it later with fabrics, etc.

  • 0
  • 1
Here is a shot of the front view. You can see that I used scrap pieces of lumber for the build.

Here is a shot of the front view. You can see that I used scrap pieces of lumber for the build.

  • 0
  • 2
Piece of 1/4 inch aluminum stock attached to motor mount and to pvc pipe for head turning motion.

Piece of 1/4 inch aluminum stock attached to motor mount and to pvc pipe for head turning motion.

  • 0
  • 0
Wiper motor mounted to a 4x4 post cap and some L brackets to attach it all to the base.

Wiper motor mounted to a 4x4 post cap and some L brackets to attach it all to the base.

  • 0
  • 3
alucard

Tombstone Troll gets a Makeover

I am working on a troll that will look at TOTs as they enter my haunt.
Click to expand...
There are no comments to display.

Album information

Album owner
alucard
Date created
Item count
25
View count
155
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

alucard

alucard

Media items
441
Albums
23
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top