Halloween Forum banner
Cancel

Add bookmark
The base of the hearse is light enough to lift and turn on its end for painting. Another shot of the fitting for the legs - and hubby's glasses restin

The base of the hearse is light enough to lift and turn on its end for painting. Another shot of the fitting for the legs - and hubby's glasses restin

  • 0
  • 0
A close up of where the "legs" and the axle idea will begin. 1" black pipe will screw into these well anchored fittings. Holes were dri

A close up of where the "legs" and the axle idea will begin. 1" black pipe will screw into these well anchored fittings. Holes were dri

  • 0
  • 0
Painted parts. . . the seat and the side panels. . .

Painted parts. . . the seat and the side panels. . .

  • 0
  • 3
The oops paint was perfect! The color is a midnight blueish black shade. Gives it some character and visually very pleasing. I think I would recommen

The oops paint was perfect! The color is a midnight blueish black shade. Gives it some character and visually very pleasing. I think I would recommen

  • 0
  • 0
Extreme Hearse Makeover! See - this is proof that I did something other than bark orders and take photos! (Notice my Extreme Home Makeover shirt and

Extreme Hearse Makeover! See - this is proof that I did something other than bark orders and take photos! (Notice my Extreme Home Makeover shirt and

  • 0
  • 0
All the parts are stretched out on the driveway tarp - cans of "oops" paint are waiting... Sun is out - go for it!

All the parts are stretched out on the driveway tarp - cans of "oops" paint are waiting... Sun is out - go for it!

  • 0
  • 1
It all comes apart...

It all comes apart...

  • 0
  • 2
How the legs and axles will attach to the base of the hearse. These are threaded braces used to install black pipe in residential construction - or so

How the legs and axles will attach to the base of the hearse. These are threaded braces used to install black pipe in residential construction - or so

  • 0
  • 1
Putting in the windows - each piece of plexiglass was more than $40. !! One of the most expensive parts purchases to be sure. Here -- it still has

Putting in the windows - each piece of plexiglass was more than $40. !! One of the most expensive parts purchases to be sure. Here -- it still has

  • 0
  • 0
Plexiglass windows... this was a very large investment - each sheet of plexiglass was $42. ! and we needed 2 sheets 35x70. These were made to slide in

Plexiglass windows... this was a very large investment - each sheet of plexiglass was $42. ! and we needed 2 sheets 35x70. These were made to slide in

  • 0
  • 0
Cutting the plexiglass -- Although Lowes was able to cut each sheet to the size we measured for, by the time we went to install it - one corner was of

Cutting the plexiglass -- Although Lowes was able to cut each sheet to the size we measured for, by the time we went to install it - one corner was of

  • 0
  • 0
This is a tight shot showing the channel that the plexiglass slides behind - and the wing-nut that keeps the back of the hearse in place. Again - we a

This is a tight shot showing the channel that the plexiglass slides behind - and the wing-nut that keeps the back of the hearse in place. Again - we a

  • 0
  • 0
HallowSusieBoo

Hearse - Part Four! - Progress made 10/11/09

Well Mother Nature finally gave us a decent day to make progress on the Hearse! We waited until we couldn't see our breath (it has been in the forties with rain until today). When the sun came out and it warmed up a bit - we dismantled the hearse and prepared to paint each of the sections. We start
Click to expand...
There are no comments to display.

Album information

Album owner
HallowSusieBoo
Date created
Item count
12
View count
120
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

HallowSusieBoo

HallowSusieBoo

Media items
450
Albums
31
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top