Thread: Cheap/ easy motion sensor

Tweet

I got mine at Wal-mart for christmas a few years ago.

These are two different sockets, the screw in one only had 2 slots and I added the extercord adpter for the thing with a ground, (or third pin).


AND YOU COULD UP THE NUMBER TOO.

BUT CAUSION NEEDS TO BE TAKEN THIS IS NOT totaly WHEATHER SAFE SO SOME KIND OF HOUSEING MAYBE NEEDED.

Very Nice, very helpful!!!!

These are GREAT. I'm using two in my haunt. One for the Rocking chair and one for the coffin.

David

Used this in my first ever yard haunt last night and it was a huge hit. I hooked my leaf blower in to it and hid it in the bushes so when trick or treaters walked by the combo of the noise and the wind on their ankles caused quite a start.

This is an awesome how to. Thank you for posting this.

Well I loved it. It worked flawlessly Saturday night!!!!!!!!!!!!!!!!!

That's awesome Serp. What did you use it for? Which props?

is there some way to use these fixtures to fire off a fogger? I know you cant plug the fogger in and do it, but is there some way to rig the switch or something?

I used it to power a leaf blower set up behind a static ghost I had build around my light post. The sensor was at ground level and set behind two bales of hay that were set wide enough to control the sensors field. The normal field was 120 degrees, but by using the hay and aiming it between the bails, I was able to set the field to around 15-20 degrees.

This was really set up on the fly after I read the original post. Oh the potential for this little jewel!!! It should really go into the Haunting Hall of Fame!!!!!!