Spider egg sac

**voodoo willy** · 09-23-2008,04:20 PM

Okay here is the tutorial. I'm not to good at putting my thoughts into words but here it goes.

If you have any questions just PM me.

Materials needed:

Chicken wire
Wire cutters
Ping pong balls
exacto blade
Hot glue gun
polyester batting (the thin kind)
Spider webbing
Liquid latex
airbrush
acrylic paints

Okay, first step is to cut the chicken wire to the size that you want your sack to be.

Fold the length in half and connect the sides and shape to the desired shape.

(Chicken wire will cut you so be very careful)

**voodoo willy** · 09-23-2008,04:25 PM

Now take the polyester batting and wrap the chicken wire frame.

Hot glue the edges to keep in place.

Next step is take the ping pong balls and place them on the covered frame.

I cut some in half and use some whole. I also put some underneath the batting and some on top.

After glueing on the ping pong balls I brush on liquid latex over the balls and some on the sack itself.

**voodoo willy** · 09-23-2008,04:32 PM

After the latex dries Take your airbrush and paint on your light base coat.

For this I used a light pale green and then I used a darker green to add some shading and viens then I came in with the black and did the same.

I went with black on this one to get a higher contrast

Next take your webbing cut into strips then dip in latex.Cover and stretch the soaked latex ofer the sack and then let dry.

Cut the webbing before you start dipping into latex. If you haven't worked with latex before you'll soon see why.