Thread: FS: Rosco 1600 commercial fog machine.

Tweet

Selling my Rosco 1600 professional fog machine. Asking $499
Any site I have seen selling them is asking $900 and up.
This is the type of machine you can rent out for around $75 per night.

This is a professional fog machine, not a rinky dink mickey mouse unit. On high it will FILL an entire house with fog thick enough that you cannot see another person 4 feet in front of you in about a minute or two. (fortunately the settings are variable down to a trickle) After a half hour with every window and door open you'll still have more fog than one of the toy units will ever put out. If you need to fill a concert hall, half a subdivision, an enormous haunted house, or something of the sort this is the unit for you. This bad mama jama weighs 24 lbs. It's not some clowny kids setup.
It was previously very lightly used to conduct a wind tunnel test. Have you ever seen one of the videos of a car in a windtunnel with a large volume of air passing over the vehicle at 100MPH, well this bad oscar cranks out enough smoke that you can see that air as it flows over the car!

The Rosco Model 1600 offers very high output and remarkable flexibility in a compact and easily transportable unit.

As with all Rosco fog machines, the Model 1600 is designed for professionals. That's why it has a Turbo/Compressed Air Input that allows effects to be created and the machine to be cleaned easily and quickly. (clogged heat exchangers are the most common form of machine malfunction. Compressed air cleans the heat exchangeer in minutes.)

The Rosco 1600 features a compressed air port to allow easy cleaning of the heat exchanger. It also allows you to use compressed air to help create a wide variety of special fog effects.



Rosco's 20 years of fog experience has resulted in the Model 1600 fog machine, the choice of professionals worldwide. The Model 1600 offers high output and remarkable flexibility in a compact and easily transportable unit. It has volume control to give just the right amount of fog for just about any situation from small wisps to large clouds. The Model 1600 is controlled through a control panel that serves as either the remote or on-board control and is connected to the machine with a standard 7 pin XLR connector.

The system uses a peristaltic pump that has a unique aluminium pump housing designed specifically for this machine. This pump, in conjunction with a steel heat exchanger, makes the equipment extremely rugged and enables it to generate higher outputs than other fog machines.

There are a wide array of accessories available for the Model 1600 that enhance its flexibility from the timed Super Remote to a DMX Interface. In addition, by using the new Rosco Coldflow or the Chiller Module with Rosco Stage & Studio Fluid, low-lying fog can be achieved. This is a more economical way of attaining this popular effect without the messiness of dropping dry ice in hot water.

The Model 1600 also offers an air input that allows effects to be created and the machine to be cleaned easily and quickly. (Clogged heat exchangers are the most common form of machine malfunction. Using compressed air helps keep the heat exchanger clean.)

Power requirements:

120 volts, 50/60 Hz, 11.75 Amps.

220/240 volts, 50/60 Hz, 7.5 Amps.

100 volts, 50/60 Hz, 13.5 Amps.

Dimensions: 18.75" x 8.25" x 7.25" (48cm x 21cm x 18.5cm).

Weight: 24 lbs. (9.45 kg).

Warm-up time: Approximately 5 minutes.

Maximum fluid consumption: 2.5 litres per hour. 63cc per minute.

Particle size: 0.25 - 60 microns.

Standard remote: 24 volts DC system. Fog switch, fog light and ready light. Cord - 15 feet (4.57m).

Power cord: 7.5 feet (2.25m) EAC Type female plug.

do you still have the machine? if yes, tell me about what's included in the sale, condition of machine/smoke output and best price you can do with it.
thanks,
lew

I sold it to a local air soft place to fog out their warehouse.
I wish you would have made me the typical lowball offer first before I was able to tell you I got my asking price.

I still have plenty of toilet monsters let though on ChuforiaGraffix.com