Thread: DIY Blood Fountain

Tweet

YOU WILL NEED

-large fountain nozzle kit ($11.92 @ Hme Depot)
-Total Pond 40-70 gal pump ($18.96 @ Home Depot)
-floating foam prop, with a 1/2 in. hole cut through top to bottom
-1/2 in tubing, enough to go thru entire prop & attach to pump
-cheap plastic kiddie pool
-black Fusion spraypaint (its a brand that adheres to plastic)
-various body parts
-theater blood, thinned almost the consistency of water, or blood colored water


First, spraypaint pool & let dry. Next, attach pump to bottom inside of pool (it has suction cups). Attach tubing to pump and feed thru prop. Attach desired fountain nozzle to top of tubing. Fill pool with blood or water, whilst holding prop at desired level, so its not covered in blood. let prop float, plug in pump, and wait 5 min. If the pump is slow, add more water to the blood. Add body parts & enjoy!

I saw this @ somebody's house and asked how they did it.

i do the same idea, but with an old lab sink i have and blood water pures out of the tap and then goes back to the pump!! again great idea!!!!!

peace Ben

Okay, you first. Be sure to post video, too.

That's cool. There is a guy down the street that has an old cast iron claw foot tub in his yard. It's been there for years. Thinking about asking if he wants to get rid of it. This would be a cool setup for something like this. Thanks !