Thread: VSA help

Tweet

I need some help finding a post or a thread about VSA. It has to do with the settings. The problem I'm having is the jaw opens to the max position and will not move as it should. I thought I saw something here about this, but can't remember who or when it was posted . Thanks, bfjou812

Saw you post requesting info on Fl. Haunters and this post.
I searched this forum and perhaps this link
New Version of VSA: V4.0

or at Fl. Haunters go to the "Servo Assistance" post and he might be able to help.
I personally know nothing about this stuff.
But I searched since no one has posted anything for you yet. LOL

cylonfrogqueen, Thanks for the reply. I found the answer by " reading the directions", that is a novel idea is'nt it !?? Again thank you for your help. Jeff

That servo may be wired in reverse or probably the servo horn is set to the wrong side. You can reverse the movements of that servo. Go to tools, track adjustments, presets, double click custom and select servo reverse. Make sure that you have selected the correct device # first. This may help, but i can't be sure without seeing your particular setup. Hope this helps. I am by no means any kind of expert, but its the first thing that came to mind.