Thread: Coffin plans

Tweet

I want to build an old fashioned coffin, does anyone have a blue print or plans?

Do a search for toe pinchers...I think I have some booked marked...I'll look later. Going to work on my haunt right now.

Dennis

http://www.shallowvalley.com/pincherplansprint.html

http://coffin.casadesade.com/

Does anyone have an idea of what it costs to make 1 of these? Thanks. :-)

Thanks, that's is exactly what I was looking for.
SB I will let you know the cost after I hit Home depot.

I highly recommend this one from ScareFx.

Materials are only $25 (no joke) from Lowes...It took me 2 hours to cut the wood and about 3 hours for assembly...and best of all it uses pressure treated wood....

I always liked the look of the boards instead of the plywood, unless your putting it in a place that is so dark....in which case, you'll never see the boards.

http://www.scarefx.com/project_coffin.html

SB, If you have the fence pickets in your area (HD,Lowes)....$25.

I had to use 1"x4" which came out to be a little more expensive.

edit: hahaha berk you beat me to it!!!!

Z

Yeh...I like the boards better than plywood. I'll try the fence picket approach and see how it comes out.

I just went to Home Depot and a 1" x 6" x 6' pine board was almost $5 a piece.
$5 x $15 = $75.
I didn't see any fence pickets, so I'll have to check Lowes. Are you sure on the cost of $25?

I just built a privcay fence at home, so I know for a fact that Menards (if ya have one) carrys 1" x 6" x 6' treated dog-eared fence pickets for $1.59 ea. Cheap, Cheap, cheap.