Thread: So could you use this to build upon?

Tweet

I have a half body mannequin almost like this pic but he does have arms that come half way down. After doing some reading could I use Liquid
Latex and use this to make half body molds? I figured if so then I could work on mask and start or have a template for making ground breakers?
I figured you could make your own arms and just build upon this? Whats your goons thought on this?
Dan

Definitely has potential.You could make arms by stuffing pantyhose legs (cut them apart)-with pool water noodles, leaves, packing peanuts or plastic bags-use duct tape to attach.You could also duct tape a dowel to the arm to make it stiff,add gloves for hands.The same for the legs-use a 3 inch wide board with a sharp end to jam it into the ground.Or into boots nailed to a black painted 3x3 piece of plywood.Pantyhose can also be used to sculpt a head.Good luck and show your creation when you are done!

Thanks but what i was hoping to do was make molds of the casting to make several bodys you know? Thats why I was thinking I could make a mold. If anyone knows a how to site that would be cool.

Or plaster of paris over it using StiltBeast's method to make a mold.