Thread: Help with mounting

Tweet

I know this has probably been asked before, but can someone give me an idea on how to mount the head with P.V.C. pipe to the lifter, What i would need to make or buy? Some pics of what I kind of got attached. THANKS

You could use a slip to threaded adapter,thread that into a floor flange then bolt the floor flange to the cross bar on the lifter. You might have to make some sort of an adapter plate or bar to go on the lifter.

easier to show you than to explain...use zip ties or even duct tape to connect the crossing pieces of PVC to the T of the frame.





not much force on the PVC so it doesn't take much to hold it in place but the head needs to be connected to the PVC by a bolt or screw or greatstuff foam....anything that will keep it connected with the PVC or it will fly off every time the prop is activated

Something like This ?

Thank you all for the help some good ideas. I had a brain fart and could not come up with a solution.

Originally Posted by Diabolik

Something like This ?

That's exactly what I was refering to when I said , floor flange .Thanks