Thread: groundbreaker coffin

Tweet

hello,

im looking to make a groundbreaker coffin but cant find any measurements. the project thread # 4 thats on the tutorial isnt showing any pics and does anyone have one built that can run me off some measurements. im going to make it out of pallet wood.
Thanks,
Chris

There are a couple here. http://www.halloweenmonsterlist.info/

You might also want to check under toe pincher coffin as well. Those will most likely give you the full dimensions, but I'm sure you can figure out what you need from there.

Please post a picture of the finished product.

Are you wanting to find out the measurements for a full size coffin?

no the groundbreaker ones that look like its coming out of the ground. i wanted measuremets so everything is proportional

I have measurements here for the Slimline Groundbreaker I made. I think you're wanting to make a larger coffin, though.

Slim-line Groundbreaker Coffin

yes im ooking for something like this!



http://www.flickr.com/photos/61737706@N06/5728310562/

I could also use something that size or even a foot or too longer. I made the toe pincher a few years ago and am making it into a mib this year if possible. I would like to make the groundbreaker one so it will open and close the door with a ghoul inside.
I make DaveintheGrave's one but, it tends to get lost with the dark color. I need to light it better I guess.

yes i need to make A full size one as well but i have found measurements for that one and cant for the groundbreaker one

I thought of making another full size toe pincher and then marking it off and cutting it to my desires but, would rather have measurements ahead of time also so I'm not wasting wood.

ctarpy just use the measurements you have for the full size but build it only so far down...cut the height of it about as long as you need it