Thread: EPS Foam Walk thru question!

Tweet

Started planning a 32 foot long by 5 foot wide by 10 foot high walk through mausoleum. The walls and roof will be 2" x 4' x 8' EPS foam panels backed by 3/8 plywood. Does anyone know of a direct supplier for this type of panel?

why dont you just build the panels? go to home depot and lowes get the plywood and mount insulation foam to it then dremel it if you want stones or whatever then paint it over?

I am going to build them just looking for cheaper foam than that at Home Depot. Im going to need 60 4x8 sheets of foam EPS and it will be very expensive thru home depot or lowes.

Yes you need to fins a specialty store because if you order online while it might be easier to find yull get nailed with shipping costs ill see if i can find a foamular link.

http://compare.ebay.com/like/1805605...=263602_309572

http://compare.ebay.com/like/1805605...=263602_309572

this site could be better then the last one because the other link is pick up in MI

You might want to call a local builder or lumberyard and see who in your area will sell to the public, or maybe you can get someone with a contractor's license to buy it for you.

I suspect any "deal" you find online will be murdered by shipping fees.

Thanks for the info. I did find a company called insulationcorp.com that sells 4'x8'x2'' sheets for $10.50 each and 4'x8'x1.5" sheets for $7.50 each these are EPS #1 density. They have many hubs, the closest to me is about 1.5 hours so I will have to pick up the order to save on shipping.

there you go perfect! make sure to showcase when your finshed