Thread: Moster Mud Mad House

Tweet

I'm thinking of draping my house with fabric and coating with monster mud, but not have it stick permanently to the outside. The question I have is how much of each will cover it about around 1700 square feet? Kind of like an adobe look to it.

I want the "shell" to then raise and lower with neumatics but I'm aprehensive if my compressor can handle the lift, and how I can make it reset with a step switch under the welcome mat.

After it raises I would like to power LED's to flash through the windows... around a couple of thousand... but I also not sure what resistor I should use at 240 volts 60 amps.

All this and have a fog chiller contained in my mail box that will suprise the guest by having a wiper motor dump the ice on their shoes.

Thoughts?

You want to cover your entire house in fabric, then monster mud it, and somehow LIFT it off the house? Wouldnt that pretty much require a crane?

The 'resistor' to use for a 240v 60amp circuit to light 'a couple thousand' LEDs? Really?

So, it's april fools today huh?

Although that would be insanly sick That would take alot of money time and power to lift it especially becasue monster mud is pretty heavy now take that time 1700 square feet and your looking to use pneumatics to lift it up yull either need a crane or houndreds maybe even thousands of cylinder power to do that. unless im imagining it wrong!

Thanks guys! I had thought after it lifts it could spin before lowering again but I thought that would be way too impracticle.