Thread: DMX input devices

Tweet

I am looking for a DMX input for solenoids. Basically, I need each device to have it's own I.D. and be triggered remotely via the DMX 512 protocol.

Hook, this seems to be your area of expertise!

Welcome but this is the member introduction section. You may want move this post to the help section of the forum.

lonkimbar,

The Medusa DMX board I sell can do this. The board has 8 switch-type outputs that can be used to control DC relays (to switch your solenoid valves). Or if your DC solenoid valves use less than 150mA each, they can hook directly to the board.

Here's some more info to give you an idea...
Application Note
Manual

- Hook

Amazon.com: Used and New: DMX Controlled Relay Kit

I have one of these. If you just need to add a single DMX controlled relay. This works good . I use it to trigger my DVD player. I chose this seperate relay because it is only used as a switch for the DVD, no current. For powering on/dimming 110V devices I use Chauvet Dimmer packs.

Pete