I 'm running only 1 prop this year and this is How I was told to do it by CJS
serial cable from computer to the controller, then Cat5 cable from the
controller to the skull. I cut the pigtail off each servo, about 6" long, and
soldered each to a wire pair of the cat5 cable, so it plugs right into the
controller. Then soldered the other end of the Cat5 cable to remaining
pigtail still on the servo.
so to answer your question yes ,they will worlk . if you dont know how to do cat5 you can get ready made extention cables drop me a pm.Hugs
|